Skip to content
TrustList
News

Pakistan orders paper and synthetic leather makers to install production monitoring

Editorial

By TrustList Editorial

FBR Sales Tax General Orders 38 and 39 of 2026 require paper and paperboard makers to run electronic production monitoring by 15 December 2026 and synthetic leather makers by 30 November, through FBR-authorised vendors.

About Pakistan orders paper and synthetic leather makers to install production monitoring

Pakistan orders paper and synthetic leather makers to install production monitoring

19 November 2026: Pakistan's Federal Board of Revenue (FBR) has extended its electronic monitoring of production to two more industries. Sales Tax General Order 39 of 2026 requires every registered maker of synthetic or artificial leather, the PU and PVC coated fabric sold as rexine, to have a monitoring system working on every active roll-producing line by 30 November 2026. Order 38 of 2026 gives paper and paperboard makers until 15 December 2026 to do the same at every paper machine and production line. Both orders are issued under section 40C(2) of the Sales Tax Act, 1990, Chapter XIV-BA of the Sales Tax Rules and S.R.O. 1751(I)/2026 of 7 October 2026.

Not yet independently verified. The scope, deadlines and system requirements come from the two FBR orders, both dated Islamabad, 19 November 2026 (PDFs read on 22 November 2026). The orders name their authorised vendors in tables we could not read cleanly, so we do not name them. We will update this when it can be confirmed, and remove this note.

Who has to install it

The paper order covers all registered manufacturers of paper and paperboard, including toll manufacturers and composite units, but not units that only cut and print. Its system must count and weigh output by grade and GSM, and also watch the point where a mill takes its own paper for use in other goods on the same site. Chief Commissioners Inland Revenue will name focal persons, and the list of businesses attached to the order does not limit who it applies to.

The synthetic leather order applies to anyone who coats, laminates or finishes fabric with PU, PVC or another polymer, anyone who winds, re-winds, inspects or cuts the material into rolls for sale, and composite units doing both, including toll and contract manufacturers.

Four stages of monitoring on every leather line

Order 39 sets out the technology in detail, at the point where finished rolls are cut and removed:

  • a length sensor turned by the material itself, never fitted to a motor-driven roller, recording to 0.1 metre;
  • an industrial camera with AI video analytics on an edge device that confirms material is running, detects each roll cut and keeps a snapshot and a video clip of at least ten seconds either side;
  • a read-only roll record with a system-generated roll ID for every roll, plus running metres per line for each shift, day and month;
  • reconciliation of roll records against running metres, with an alert where they differ by more than 0.5%.

Records, snapshots and running totals go to the FBR in real time, with offline buffering when the connection drops. Video is kept on site for at least thirty days. Counting accuracy must be at least 99%, calibration is checked at least every six months, and neither the manufacturer nor the vendor may change a calibration factor, counting line or camera position without the FBR's approval. Equipment may only be bought, installed and maintained through a vendor the FBR has authorised.

What manufacturers should do now

  • Synthetic leather makers have days, not weeks: contact an FBR-authorised vendor at once and arrange the site survey.
  • Paper and paperboard makers should map every machine and line, including in-house use of their own paper, before the vendor visit, so nothing is left out of the configuration.
  • Plan for the network, power backup and edge computing the orders require; data gaps and connection losses raise alerts to the FBR.
  • Contact the focal person named by your Chief Commissioner Inland Revenue if installation cannot be finished on time.

Sources

Categories & features

TrustList Weekly

The week in software and IT, in one email

The news that matters to buyers, new rankings and our own research. Every Thursday, free, and easy to leave.

We will email you to confirm. Unsubscribe with one click in any issue. Privacy policy

You may be interested in